CE Marking Service for all EU countries and Global.Conformity Experts support CE marking and Conformity assessment procedure.Review technical file based on 2006/42/EC and EN ISO 10218-2
Electrical measurements based on EN 60204-1
Overall stop time measurement - install light..
The grasping action of the flexible gripper is inspired by the tentacles of an octopus, which can softly wrap the grasped object, and achieve flexible grasping without damaging the object or leaving scratches on the surface of the object. And it is widely used in various industries such as auto part..
The ARTUS 3D Hand is designed for Dull, Dirty, and Dangerous tasks. This agnostic universal end-effector is designed and built to automate complex industrial tasks not possible with conventional grippers. We made the hand easy to integrate and operate, with the average setup time being approxim..
Intellistore is a fast growing, automation solutions provider that is disrupting the intralogistics material handling systems sector.Our leading edge design and engineering team provides innovative turn-key, automated solutions for sort centers, distribution centers, warehouses, automotive ..
Payload: The Kawasaki RS080N has a payload capacity of 80 kilograms (176 pounds). This means it is capable of handling objects weighing up to 80 kg during its operation.
Max. Reach: The robot has a maximum reach of 2,100 millimeters (82.7 inches). This reach allows the robot to access a relatively..
Rated payload: 130 kg
Maximum reach: 3100 mm
Mounting position: Floor
Pose repeatability (ISO 9283): 0.06 mm
Number of axes: 6
Ambient temperature during operation
10 °C to 55 °C (283 K to 328 K)
Ambient temperature during stor./transp.
-40 °C to 60 °C (233 K to 333 K)
Protection r..
The IMU is a 10-DOF sensor module consisting of a tactical grade Inertial Measurement Unit (IMU), magnetometer, and barometer. Output includes angular rate, linear acceleration, magnetic vector, and barometric pressure and altitude. IMU calibration consists of bias, scale factor, cross-axis ali..
The RUG-3-IMX-5-DK series adds a rugged aluminum enclosure and RS232, RS485, and CAN Bus interface to the IMX-5. This development kit is designed for testing and evaluation and contains our RUG-3-IMX-5, interface cables, software, and engineering support hours.The IMX-5 is a 10-DOF sensor module..
The GZA grippers are primarily used to grip the sprue. There are different types of grippers available. However, the component can also be gripped with the gripper. The gripper can be a good alternative to parallel grippers.More Info www.ags-shop.de..